Learn

Painting guides for Central Florida homeowners

Straight answers to the questions people ask before they paint.

Choosing a paint finish (sheen)

4 min read

Sheen is how much light a dried paint film reflects. More sheen means a harder, more washable surface, but it also shows every dent, patch and roller mark. Names vary a little by brand, but the order is always the same:

SheenLooksBest forWatch out for
Flat / matteNo shine, rich colorCeilings, adult bedrooms, low-traffic living roomsLeast scrubbable (premium “washable matte” lines help)
EggshellSoft, low glowLiving rooms, hallways, most wallsSlightly shows wall flaws
SatinPearl-like sheenKitchens, bathrooms, kids’ rooms, high-traffic wallsTouch-ups can “flash” (look shinier)
Semi-glossNoticeably shinyTrim, doors, baseboards, cabinets, humid bathsHighlights surface imperfections
High-glossGlass-likeFront doors, accents, furnitureNeeds near-perfect prep

Rule of thumb: walls in eggshell or satin, ceilings flat, trim and doors semi-gloss. In Florida bathrooms without strong exhaust fans, satin or semi-gloss resists moisture and mildew better than flat.

Florida humidity, sun and exterior paint

5 min read

Central Florida combines intense UV, heavy summer rain, high humidity and mild winters that let mildew and algae grow year-round. That changes how exterior paint should be chosen and applied.

  • Clean first, then let it dry. Pressure washing removes dirt, chalk and mildew, but stucco and block soak up water. Surfaces need to dry thoroughly (often a day or more) before priming.
  • Treat mildew, don’t paint over it. A mildewcide wash kills spores; paint over live mildew can let it bleed back through.
  • Prime chalky or bare masonry. Chalking (a powdery residue on old paint) and fresh stucco patches need a masonry or bonding primer so the topcoat grips.
  • Bridge hairline cracks. Stucco moves with heat. Elastomeric patching and, where suitable, elastomeric coatings can bridge small cracks and shed water. They are thick and need the right conditions, so they aren’t right for every wall.
  • Use 100% acrylic exterior paint. Quality acrylics stay flexible, resist UV fading and allow some moisture vapor to escape.
  • Watch the weather window. Read the label for minimum temperature and recoat times. In summer, crews often work mornings and avoid painting right before afternoon storms or when dew will settle on wet paint.
  • Lighter colors stay cooler. Dark colors absorb more heat and can fade faster in full sun. If you love a dark color, ask about lines that use heat-reflective pigments.

How long an exterior paint job lasts depends on prep, product, color, sun exposure and maintenance. Gently washing the house every year or two and fixing caulk and cracks early adds years to the finish.

How much paint do I need?

3 min read

  1. Find the wall area. Add up the length of all walls, then multiply by ceiling height. A 12 × 14 ft room with 8 ft ceilings: (12 + 14 + 12 + 14) × 8 = 416 sq ft.
  2. Subtract big openings. About 20 sq ft per door and 15 sq ft per average window.
  3. Multiply by coats. Two coats is standard, especially for color changes.
  4. Divide by coverage. Most labels say 350–400 sq ft per gallon on smooth surfaces. Textured walls and stucco use more, often closer to 200–300.

Example: 416 − 20 (door) − 30 (two windows) = 366 sq ft × 2 coats = 732 ÷ 350 ≈ 2.1 gallons → buy 2 gallons plus a quart, or 3 gallons if you want touch-up paint.

Ceilings: length × width. Trim: about 1 quart covers the baseboards and casing of an average room. Try the calculator to do the math for you.

Tip: big color changes (dark to light, or a bright red or yellow) may need a tinted primer or a third coat.

Prep: the steps that make paint last

4 min read

Most paint failures (peeling, blistering, cracking, stains bleeding through) are prep failures. A professional job should include:

  1. Protect. Move and cover furniture, mask floors, outlets, fixtures and landscaping.
  2. Clean. Degrease kitchens and trim, wash exterior surfaces, kill mildew.
  3. Repair. Scrape loose paint, fill holes and cracks, fix nail pops, replace rotted wood, patch stucco.
  4. Sand. Feather patch edges and scuff glossy surfaces so new paint bonds.
  5. Caulk. Seal gaps between trim and walls, around windows and doors, with paintable caulk.
  6. Prime. Spot-prime patches; fully prime bare wood, new drywall, stains, chalky or glossy surfaces.
  7. Paint. Apply finish coats at the label’s spread rate and recoat time, cutting in cleanly.
  8. Inspect. Walk through in good light, touch up and clean up.

Older homes: homes built before 1978 may contain lead-based paint. Federal EPA rules require certified renovators and lead-safe work practices when disturbing painted surfaces in those homes.

Color by room: how color feels

4 min read

Color perception is personal, but some patterns are widely used by designers:

Bedrooms

Soft blues, greens and muted neutrals feel calm and restful. Very saturated reds and oranges can feel energizing, not ideal for sleep.

Kitchens

Warm whites, buttery yellows and greige feel bright and welcoming. Consider how the color looks next to countertops and cabinets.

Living rooms

Warm neutrals and greige are flexible with changing decor. An accent wall adds personality without committing the whole room.

Bathrooms

Spa-like greens, aquas and crisp whites feel clean. Small, windowless baths can handle deeper colors for a cozy, dramatic look.

Home offices

Greens and blues are often chosen for focus; a warm neutral keeps video calls looking natural.

Front doors

A contrasting door color (navy, black, coral, teal) adds curb appeal. Check HOA rules first.

Light matters: Florida’s bright light can wash out pale colors, and north-facing rooms look cooler. Paint large sample swatches, look at them morning and evening, and check the color’s LRV (light reflectance value) on the chip: higher numbers reflect more light. Preview ideas in our color visualizer.

What affects painting cost?

4 min read

Two quotes for the “same” job can differ a lot. These are the main drivers:

  • Size and surfaces: wall area, ceilings, trim, doors, cabinets, and how many colors.
  • Condition and repairs: cracks, peeling, water damage, rotted wood and stucco repair add labor before any paint goes on.
  • Prep scope: washing, scraping, sanding, caulking and priming. This is where cheap quotes often cut corners.
  • Height and access: vaulted ceilings, stairwells and two-story exteriors need ladders, planks or lifts.
  • Product grade: premium paint costs more per gallon but can cover better and last longer.
  • Color changes: going from dark to light (or vice versa) may need primer or an extra coat.
  • Occupied spaces: moving furniture and working around daily life takes time.
  • Season and schedule: rush timelines, HOA requirements and weather windows can affect planning.

Comparing quotes? Make sure each lists the same surfaces, prep steps, number of coats, product line, warranty and cleanup. Use our calculator for a ballpark, then request a free estimate for a real number.

Frequently asked questions

How long does interior painting take?

A typical bedroom can often be finished in a day; a whole-home interior may take several days depending on size, repairs and number of colors.

Do I need to be home while you paint?

No. Many clients share access instructions. We walk through the plan before starting and again at the end.

Can you paint in summer rain season?

Yes, with planning. Exterior work is scheduled around storms, surfaces must be dry, and crews follow label temperature and recoat guidance.

Do you help pick colors?

Yes. Try the online visualizer, then we can test sample patches on your walls before you commit.

Is the online calculator a quote?

No. It gives a rough range from sample rates. A written estimate after a walk-through is the real price.

Call Free Estimate